1. Clean your wall.
Be sure that the surface you are applying the decal to is smooth, dry and free of dust and dirt. |
2. Prepare the decal.
Roughly cut around the individual graphics. Lay each decal on a flat surface and press firmly over the entire decal with the edge of a credit card or similar object. |
3. Plan your layout.
Arrange the decals on your wall using masking tape (on the top edge only). Don’t remove the white backing until you are happy with your layout. |
4. Remove the backing.
Slowly peel the white backing away from the transfer film making sure the vinyl decal is sticking to the film. Stop if some of the decal remains stuck to the white backing. Rub the decal in that area and slowly continue peeling until the white backing is completely removed. |
5. Apply the decal.
As you lower your decal against the surface carefully move your hand slowly across the decal pressing firmly on the graphic. With your finger or credit card finish the application by rubbing over the entire graphic to remove any air bubbles. |
6. Remove the transfer film.
Once you have removed the air bubbles carefully remove the transfer film making sure that the decal is sticking to your surface. |
